Pure air in the home with CMV and integrated micro-ventilation

CATEGORY: HI TECH

The air in our homes can be up to five times more polluted than outside. Controlled mechanical ventilation and new generation windows and doors with integrated micro-ventilation are at the service of our homes to give us healthier environments.

CONTROLLED MECHANICAL VENTILATION (CMV)

Controlled mechanical ventilation or CMV is also called forced ventilation and is a technologically advanced air filtration and renewal system, which allows not only to have air in the house that is always pure and at the right temperature but also allows you to avoid the onset of mold and to eliminate, through its filters, a whole series of allergens that can be harmful to health.

In addition, CMV guarantees high living comfort even for people suffering from respiratory diseases and last but not least, it also allows considerable energy savings by avoiding the dispersion of heat, due to the opening of the windows, during the winter season and the formation of annoying drafts.

CMV systems: Various types

There are various types of CMV systems, which are not to be confused with stale air extractors

  • Centralized CMV systems: designed especially for new homes: they require rather expensive masonry work, such as false ceilings and ducts as well as a dedicated technical room. Alternatively, to contain costs for the same performance, you can opt for a Single Room CMV system. A limitation of centralized ventilation systems is that the air treatment is managed in standard mode (the same for everyone) without the possibility of customizing the air flow rate, which is instead allowed by decentralized controlled mechanical ventilation systems.
  • Decentralized CMV systems: decentralized CMV systems are more versatile and suitable for new constructions, renovations and houses already inhabited because they are very small and can be installed without major masonry work. In most cases, 2 core drills of 8 cm in diameter are enough. They are flexible and customizable: they allow you to manage the air flow for each individual room.

In addition to the two macro-categories, CMV systems can be divided into:

  • systems without heat exchangers that basically filter and extract stale air
  • systems with heat exchangers which, in addition to filtering and extracting stale air, recover the heat produced inside the ventilation system. In this case, the most direct consequence is greater energy savings.

Heat exchanger systems, in addition to being more effective, offer the alternative of choosing between single-flow and alternating flow systems.

Single-flow CMV systems

In this type of system, forced ventilation is entrusted to a unit that introduces or extracts air. It is mainly used to introduce the appropriate amount of air into the rooms, after filtering it.

They do not have a heat exchanger, so they are more suitable for temperate climates that do not have high temperature changes.

Alternating Flow CMV Systems

This type of system is equipped with a single pipe that works in alternating cycles of intake and extraction. For a set period of time, for example one minute, they extract stale air and then, for the next minute, they introduce air into the environment

To obtain good results, and to be in compliance with the EN 13141-8 standard, they must always be installed in pairs

Dual-flow CMV systems

They are ventilation units complete with a heat recovery system that manages the intake and return of air from the individual rooms. They are designed to obtain high air filtration with a very low operating cost as they recover most of the energy necessary to maintain internal conditions by exchanging heat between the supply air and the extracted air, significantly reducing energy consumption.

They simultaneously perform the functions of extracting stale air and introducing clean air into the environment and in addition, by recovering the heat generated by the two functions, they allow good savings on the bill on normal heating costs.

They are versatile and easy to install on the wall, in the window or in the glass.

INTEGRATED MICRO-VENTILATION

Alongside the increasingly efficient and versatile CMV systems, we find another interesting domestic air exchange system: integrated micro-ventilation.

It is a suitable solution for houses undergoing renovation because it involves replacing the old windows with new windows equipped with a micro-ventilation system that allows the necessary air exchange, the regulation of internal humidity to avoid the formation of mold, the filtering of pollen, allergens and pollutants.

Integrated micro-ventilation can be a valid alternative to CMV, in case you do not want to or cannot tackle demanding works and is particularly useful in all humid rooms of the house such as kitchens, bathrooms and laundries.

Its advantages are undoubtedly ease of installation and low costs with high performance.

The content of this article is provided for informational purposes only. It does not constitute professional advice and does not replace the advice of qualified experts. Before taking any action based on what you have read, you are advised to consult professionals competent for your specific situation. The author and the site do not assume responsibility for any errors, omissions or regulatory updates subsequent to publication.

DID YOU KNOW YOU CAN EARN € 800 A WEEK WITH SHORT-RENTALS?
Income Diversification
Overlay Image
DID YOU KNOW YOU CAN EARN € 800 A WEEK WITH SHORT-RENTALS?
Income Diversification