Minimum distance between buildings: conditions and regulations

CATEGORY: Real Estate Guide

The design and construction of new buildings or the extension of existing structures require careful compliance with the regulations regarding the minimum distance between buildings and boundaries. These rules are not just a formality, but play a crucial role in ensuring a balance between urban development, security and property rights.

In this article we will deepen the legislation regarding distances, examining its main aspects and analyzing the various cases.

Minimum distances between buildings and property lines

In Italy, the legislation on distances between buildings and boundaries is mainly regulated by the Civil Code, in particular by articles 873 et seq. These provisions are aimed at ensuring a correct relationship between neighboring properties, avoiding the emergence of conflicts and ensuring a harmonious organization of urban spaces.

What is the minimum distance between buildings?

Article 873 of the Civil Code states that the minimum distance between buildings must be at least 3 meters, unless otherwise specified by local regulations or municipal urban plans. This distance may be increased by building regulations or municipal zoning plans for reasons of safety, hygiene, or urban planning requirements.

  Art. 873. 
 
 (Distances in Construction). 
 
 Buildings on adjacent lots, unless they are joined or attached,
must be set at a distance of no less than three meters. Local regulations
may establish a greater distance.   
 

Distance from property boundaries is an issue regulated by the Italian Civil Code , which aims to ensure a balance between the rights of neighboring owners and the protection of the public interest.

The relevant provisions establish that each construction must respect a minimum distance from the boundary to avoid problems related to:

  • Neighboring property and rights: to prevent situations in which a building could invade the space of others or compromise the rights of enjoyment of neighbors.
  • Light and air: to ensure adequate living conditions, ensuring that each property has sufficient access to natural lighting and ventilation.
  • Safety: To reduce the risk of damage to neighboring property in the event of structural failures or other building problems.

What is meant by building/construction?

In the context of Italian building regulations, the term “construction” is not limited exclusively to residential or commercial buildings, but includes a wide range of works characterized by solidity and stability and their immobilization with respect to the ground. According to Article 873 et seq. of the Civil Code, constructions are all those works which, due to their consistency and function, may interfere with neighborly rights, such as the distance between buildings. For example, enclosure walls, canopies, porches, pergolas and even temporary structures can be considered constructions for the purposes of the regulations on distances, as long as they meet the criteria of durability and spatial relevance.

The concept of construction must be interpreted not only in a literal sense but also on the basis of the impact that the work has on the surrounding environment. Therefore, accessory elements, such as protruding balconies or external stairs, can also fall within the definition of construction if they affect the legal distances. This interpretation aims to protect not only the urban and landscape balance, but also the rights of neighbors and the healthiness of common spaces.

Exceptions and agreements between private individuals

It is important to note that while the general rules stipulate a minimum distance, there are possibilities for derogation in specific circumstances. For example, two neighboring landlords may sign a written agreement to allow:

  • Construction in adhesion: i.e. buildings built directly on the property line, sharing the perimeter walls.
  • Reduced or customized distances: agreeing on different measures than those provided for by the Civil Code.

These agreements, however, must comply with certain fundamental conditions:

  1. Written formalization: the agreement between the parties must be drawn up in writing, preferably notarized by a notary, to ensure its legal validity.
  2. Compliance with local regulations: Any derogation must still comply with municipal building codes, which may have more restrictive limits than national ones.
  3. Compliance with permits: You may need to obtain specific permits or zoning permits before proceeding with construction.

Local regulations, urban plans and PRCs

It is important to note that the Civil Code provides general provisions, but many rules on distances are left to local regulations, municipal master plans (PRC) and regional regulations. Each municipality can adopt more restrictive rules than those of the Civil Code, taking into account the particular needs of the territory.

For example:

  • Building codes may impose greater distances between buildings to ensure better living conditions.
  • Landscape or environmental constraints may be provided that affect the possibility of construction in certain areas.

Although the Civil Code represents the regulatory reference at the national level, it is essential to consider local regulations, such as Municipal Master Plans (PRCs) and regional regulations, which may introduce restrictions, specificities or even derogations from the general provisions. These urban planning tools are adopted by municipalities to regulate land use, ensuring an orderly and sustainable development of cities and rural territories.

Minimum distance between buildings: conditions and regulations municipal master plan

What are Municipal Master Plans (PRC)?

The PRC is the main urban planning tool at the municipal level. It is a technical and regulatory document that establishes the guidelines for the management and organization of the municipal territory.
Among its main functions, the PRC:

  • It defines the intended uses of the various areas of the territory (residential, industrial, agricultural, etc.).
  • It establishes the minimum distances between buildings, the height limits and the permitted volumes.
  • It identifies restricted areas, such as those of landscape or historical interest, and regulates any interventions in these areas.
  • It regulates infrastructure, such as roads, green areas, and public services, to ensure harmonious community growth.

These plans take into account several factors including the topography of the territory, the population density, the environmental needs and the historical and cultural peculiarities of the area.

Examples of application of local regulations

Mountain areas: In some mountain municipalities, local regulations may provide for larger distances between buildings to reduce the risks related to avalanches, landslides or other geological phenomena. These measures aim to safeguard the safety of buildings and inhabitants.

Historic centres: In historic centres, which are often characterised by dense urban configurations and constrained by their historical characteristics, it is common to find rules that allow adherent or aligned constructions, as an exception to the distances provided for by the Civil Code. This is done to preserve the architectural harmony and the original characteristics of the area.

Technical consultancy: an essential step

Since local regulations can vary significantly from one municipality to another, it is essential to consult the municipal technical offices before embarking on a building project. Only through direct verification with the local authorities can you obtain all the up-to-date and specific information for the area concerned, avoiding penalties or non-compliant interventions.

When it is mandatory to respect 5 and 10 meters of distance between buildings in Italy

Italian legislation regulates the minimum distances between buildings and boundaries to ensure safety, privacy, lighting and adequate ventilation. A fundamental reference in this area is Ministerial Decree 1444/1968, which establishes in which cases it is mandatory to respect distances of 5 or 10 meters between buildings. Below, we will analyze in a clear and detailed way the specific situations in which these distances are required by law, distinguishing between existing buildings and new constructions, without neglecting any exceptions.

Short-term rentals banners

Distance of 10 meters

When the law imposes 10 meters

The obligation of a minimum distance of 10 meters applies mainly in the cases indicated by Article 9 of Ministerial Decree 1444/1968.

The provision provides that:

  • Tra pareti finestrate di edifici deve essere garantita una distanza minima di 10 metri.
    Questa prescrizione è inderogabile, il che significa che non può essere modificata o ridotta neppure dai regolamenti comunali o regionali.
    • Windowed walls refers to those that have main windows (for example, for living environments such as bedrooms, living rooms, kitchens) and not secondary ones such as stairwells or utility rooms.

Applicability to new buildings vs existing buildings

  • New Construction

The 10-meter rule is mandatory for all new buildings built after the entry into force of Ministerial Decree 1444/1968. Every building project, both in residential areas and in other urban areas, must comply with this provision.

  • Existing buildings

For buildings constructed before the issuance of this decree (1968), the 10-meter requirement is not retroactive. No mandatory modifications are required to pre-existing structures that do not comply with these distances. However, if an existing building is expanded or significantly modified, for example by an intervention that changes the shape or arrangement of the windows, the distance rule must be complied with.

Exceptions

  • In historic centres or in areas with particular configurations, local planning regulations may provide for exceptions to the 10-metre rule, often in order to preserve the existing building density. However, such derogations must always be justified and formally approved by the competent local authorities.

Distance of 5 meters

The distance of 5 meters between buildings or between buildings and property boundaries is often a requirement established by local urban planning regulations, but it is not a fixed rule valid everywhere. These provisions are defined through the General Regulatory Plans (PRG) and municipal building regulations, which can vary from municipality to municipality according to the specific needs of the territory. The objective of these regulations is to ensure a balance between urban planning needs and the characteristics of the local territory, protecting aspects such as the livability of spaces, privacy between properties and safety. Each municipality, therefore, can establish different minimum distances, adapting them to its context to promote harmonious urban development that respects collective and individual needs.

Practical examples

  • Low-density residential areas
    In low-density residential settlements, municipal regulations enforce the 5-meter spacing to create clear boundaries between properties, helping to preserve large private or communal green spaces.
  • Areas with landscape constraints
    Where landscape constraints exist, the minimum distance can be kept at 5 meters to protect views, architectural harmony and cultural characteristics of the locality.
  • Productive or rural construction
    In production or agricultural contexts, spacing is applied to prevent any conflicts of use between neighboring buildings or to ensure sufficient operating space.

Distances between buildings for adhesion and support buildings

The legal distances between buildings are mainly governed by articles 873, 874 and 877 of the Civil Code, as well as by Ministerial Decree 1444/1968, with the aim of avoiding constructions that are too close together that could compromise the healthiness of living spaces, neighborly relations and the general urban balance. Article 873 sets the minimum distance of 3 meters between buildings, while article 874 regulates the case of the forced communion of a wall on the border, and article 877 regulates constructions in adherence and support.

An adhesion construction occurs when a new building is built directly next to an existing building on the border, without leaving any gaps between the two structures. This type of construction makes it possible to make the most of the available space, while maintaining the structural autonomy of the new building, which must not burden the wall of the existing building. In addition, it is important to avoid the insertion of openings or elements that could violate the rights of light and view of the neighboring building.

A leaning construction is a building solution in which a new building uses an existing wall as a load-bearing element or structural part. In practice, the existing wall becomes an integral part of the new construction. However, this modality requires some fundamental requirements, such as the agreement with the owner of the neighboring wall, the sharing of the costs related to the construction and maintenance of the wall concerned (as established by Article 874 of the Civil Code) and compliance with local regulations, especially with regard to the heights of the buildings.

According to Article 877 of the Civil Code, adhering and supporting constructions are regulated by precise regulations that protect the rights of both neighboring parties.

Adherent constructions

Adherence construction occurs when a new building is erected in direct contact with an existing building located on the property line, without introducing a free space between the two.

Necessary conditions:
  1. Presence of a wall on the border
    The wall of the existing building must be positioned exactly on the boundary between the two properties. If this requirement is not met, adherence construction is not permitted.
  2. Structural autonomy
    The new building must be completely autonomous from a structural point of view, avoiding using the neighboring wall as a support or load-bearing element. Structural autonomy ensures that any work or modifications do not compromise the solidity of the adjacent building.
  3. No openings on the wall in adhesion
    The law requires that there are no openings such as windows, doors or balconies on the adhering wall that could violate the rights of privacy, light and view of the neighbors.

The neighboring owner cannot generally oppose a construction in adherence, provided that the builder complies with all the regulatory and technical provisions. In fact, Article 877 allows adherence when:

  • The wall of the existing building is located exactly on the property line.
  • No construction elements are introduced that violate the rights of view, light or privacy.

Supporting constructions

Leaning construction is an alternative to adhesion and involves the use of an existing wall located on the boundary as a structural element for the new building.

Necessary conditions:
  1. Explicit consent of the neighboring owner
    To use the boundary wall, the express consent of the other owner must be obtained. This agreement must be formalized in writing, preferably by means of a notarial deed.
  2. Cost sharing
    Article 877, in combination with Article 874, stipulates that the owner who wishes to build on support must contribute to the costs related to the construction and maintenance of the portion of the wall used. This obligation ensures fair management of expenses between the parties.
  3. Compliance with local regulations
    Municipal planning regulations may impose specific limits on heights, materials or construction methods in the case of supporting construction.

How to calculate the distance between buildings

The calculation of the distance between buildings, according to Italian regulations such as Ministerial Decree 1444/1968 and Article 873 of the Civil Code, must be carried out according to precise criteria to ensure compliance with legal distances and urban functionality. The distance is calculated by measuring the shortest segment between the external surfaces of two buildings, including not only the distance “as the crow flies”, but also protruding elements such as balconies and canopies, the geometry of the buildings (e.g. non-parallel walls) and any differences in height.

Here’s how to do it:

1. Landmarks

The distance is calculated by considering the closest point of one building to the closest point of the other, including all the elements that come out of the main shape, such as balconies, canopies or canopies. For example, if a balcony protrudes from a building by 1.5 meters, the calculation starts from the outer edge of that protrusion.

2. Non-parallel walls

If the buildings have walls that are not parallel or face each other at different angles, the minimum distance between the two constructions along an imaginary perpendicular line, which connects the nearest surfaces, must be measured. For example, if one façade is inclined with respect to the other, the shorter segment joining the two is sought.

3. Elevation gain

In the case of land with differences in height, it is necessary to project the measurement on the horizontal plane. This means that the calculation must be performed as if the bases of the buildings were at the same elevation level, but considering the actual position of the closest points. This avoids underestimating the distances between two buildings that are located at different heights.

4. Complex shapes

For buildings with irregular shapes, such as circular or polygonal plan, all possible distances between each significant point of the surfaces of the two buildings are calculated. Compliance with the standard is always based on the minimum distance detected, regardless of the overall geometry.

5. Local standards and technical findings

In addition to compliance with national regulations, municipal regulations may provide for greater distances than the basic distances set by the Civil Code (3 meters) and Ministerial Decree 1444/1968 (10 meters for windowed walls). It is advisable to use professional tools such as topographic stations or laser scanners to carry out precise and certified surveys.

Practical example:
  • Scenario: Two buildings with non-parallel walls face each other, one of which has a balcony that protrudes 1 meter.
  • Calculation: From the outer edge of the protrusion, the nearest point of the opposite surface is measured as the crow flies, also considering any differences in height for the correct horizontal positioning of the measurements.

FAQ – Distances and Building Regulations

What is the minimum distance between two houses?

According to Article 873 of the Civil Code, the minimum distance between two buildings is 3 meters. However, Ministerial Decree 1444/1968, to ensure light and ventilation, establishes that between two windowed walls of buildings in front of them the minimum distance must be 10 meters. Municipal building regulations may provide for additional restrictions or greater distances.

Do balconies have to be calculated in the distances between buildings?

Yes, according to the Civil Code and Ministerial Decree 1444/1968, balconies, protrusions of cornices or other elements that protrude from the façade must be considered in the calculation of distances. The measurement must be taken from the closest point of these elements to the building in front.

However, it is important to consider that local regulations may affect the decision of whether or not to include outdoor stairs in the calculation of distances. Indoor stairs do not affect the calculation, while outdoor stairs should be considered if they protrude and interfere with nearby properties, unless specific exceptions are established locally.

How do technical volumes affect the calculation of the distance between buildings?

Technical volumes, such as boiler shafts or elevators, are generally not included in the calculation of distances, as long as they are not habitable and are technically indispensable. However, it is essential to pay attention to local regulations, which may vary and include exceptions or specific rules. For this reason, it is always advisable to check the building regulations of the municipality or area where the building is located.

What is the Free View Index?

The unobstructed view index indicates the minimum distance needed to ensure that a windowed wall has adequate exposure without being blocked by nearby buildings. It is essential to ensure natural light and ventilation, especially in urban areas.

Is it possible to build in adherence without the consent of the neighbor?

Yes, it is possible to build in adherence without the consent of the neighbor, as long as the building is structurally autonomous and the neighbor’s rights in terms of privacy, light and view are respected. However, if it is a supporting construction, where the new structure uses the neighbor’s wall or foundation, consent becomes mandatory. In any case, it is essential to respect the legal distances and local regulations in force.

What to do if the neighbor does not respect the distances?

If your neighbor does not respect the distances, first check if there are any regulations or exceptions that could justify the situation. If the violation persists, you can consult your lawyer to evaluate if necessary to send a formal warning, and ask for an assessment from the municipal technical offices.

What kind of constraint does it impose on the land bordering the road buffer zone?

The road buffer zone is a constraint that limits the construction and installation of permanent systems to ensure traffic safety and reserve spaces for future interventions on the road network. The minimum distances, indicated by Article 16 of Presidential Decree 495/1992, vary according to the classification of the road (e.g., state or neighborhood) and can be supplemented by local regulations, but cannot be lower than what is required by national law.

What is the minimum distance from the boundary for a pergola?

The minimum distance for a pergola depends strictly on municipal regulations, which can vary greatly. For lightweight and removable structures, such as pergolas, there may be different rules than for permanent buildings. Although a distance of 3 meters from the boundary is often suggested, it is essential to always check the specific provisions of your municipality or consult the Master Plan for precise requirements and any exceptions that may apply.

What are the distances of respect from local roads?

The buffer distances for local roads are generally shorter than those for main public roads. Usually, a minimum distance of 3 or 5 meters from the road boundary applies, depending on local building regulations and the urban use of the area.

The content of this article is provided for informational purposes only. It does not constitute professional advice and does not replace the advice of qualified experts. Before taking any action based on what you have read, you are advised to consult professionals competent for your specific situation. The author and the site do not assume responsibility for any errors, omissions or regulatory updates subsequent to publication.

DID YOU KNOW YOU CAN EARN € 800 A WEEK WITH SHORT-RENTALS?
Income Diversification
Overlay Image
DID YOU KNOW YOU CAN EARN € 800 A WEEK WITH SHORT-RENTALS?
Income Diversification